In order to change the wireless frequency channel on Mikrotik, you must use the “center” channel: https://www.electronics-notes.com/articles/connectivity/wifi-ieee-802-11/channels-frequencies-bands-bandwidth.php This is especially true for Mikrotik routers using AC Wave 2 as it performs channel “bonding”. You also need to take into account your channel width. If you are using a 20mhz or Read more…
Here is what my setup looks like with a bridge I dont want to use a bridge anymore But now I want a more advanced setup, so in other words I don’t want a bridge. I want to create a new WiFi interface on my Mikrotik, assign a DHCP server Read more…
Thanks to this guy for this awesome post: https://www.reddit.com/r/pihole/comments/5g249i/tip_redirect_all_dns_to_pihole_with_mikrotik/ Basically, you need to do this: Change 192.168.88.110 to your pi hole IP Change 192.168.88.0/24 to your subnet #Make sure all DNS goes to pihole IP address chain=dstnat action=dst-nat to-addresses=192.168.88.110 protocol=udp src-address=!192.168.88.110 dst-address=!192.168.88.110 dst-port=53 chain=dstnat action=dst-nat to-addresses=192.168.88.110 protocol=tcp src-address=!192.168.88.110 dst-address=!192.168.1.2 dst-port=53 Read more…